Quantcast
Channel: VMware Communities : Discussion List - vRealize Operations Manager
Viewing all 5932 articles
Browse latest View live
↧

Deploying the vrops appliance

June 27, 2016, 6:22 am
$
0
0

This doesn't seem like this should be this difficult, but I am having an issue with deploying the vRealize Operations Linux appliance. I downloaded it twice to make sure the ova file is good, and I deploy it and fill in the configuration, and deploy it. No problem. However, when I power it on it comes up showing the ip address I gave it, but the url is https://localhost.localdom, and will not ping or connect. I checked the DNS and forward and reverse lookup are working fine. I see nothing that should be causing this. The other thing I see is the status in the vCenter client is shown as "Available". Does anyone have any ideas?

 

Thanks

 

Matt

↧
Search

vm disk report

June 25, 2016, 8:14 am
$
0
0

i have 500 vm and some vm has 1 hard disk some vm has 5 disks. now i want to create custom report but i cant find it. I want to do is the following. please can you share step by step how to create

 

vm name      hard disk1      hard disk2     hard disk3     hard disk3

 

vm1               100gb               200gb          50gb               150gb

↧
↧

can't create ManagementPackExplorerView error

June 28, 2016, 12:52 am
$
0
0

hello,guys!

 

please check the picture and the error log of attachment.

 

Thanks!

↧

Permissions - Show EPOS to other users

June 28, 2016, 3:57 am
$
0
0

I'm trying to show EPOS info to other users - when I installed the agents on the machines I used the Admin account when pointing it at vROPS, now in vROPS, only the Admin account can see OS's.

 

I log into vROPS as Admin and click on Access control, when I click on any of the accounts that I want to give permission to, the Edit button is grayed out.... It is the same for groups.

 

Any thoughts? Thanks!

↧

vcenter alerts showing in vROPS

June 27, 2016, 7:51 am
$
0
0

My apologies if my question sounds stupid but I am new to VROPS I have added my vcenter to vrops and I am trying to understand how alerts get sent from venter to vrops, I have created a new alarm in vcenter if a guest gets turned off. but the alert is showing on the guests in venter but does not show up in vrops.

 

Any Help would be much appreciated.

↧
↧

Possible Bug Find - vROps 6.x - When Active Policies exceed 20, drag and drop priority reorder operation fails

October 16, 2015, 7:31 am
$
0
0

I may have stumbled upon a possible bug that I have not seen mentioned anywhere.  When the active policy count in vROps 6.x exceeds 20, forcing the list to a 2nd page, reordering of the policies fails with "DB active policy count doesn't match input policy id count".

 

I tested this multiple times, and dissociated policies from groups to reduce from 22 active policies to 20 and reorder functionality works.  This was performed several times and the error is repeatable.

 

vROps_Bug_ActivePolcies.jpg

 

Workaround:

1) Disassociate policies from groups/objects which you want to be at the bottom of the priority order and save.  Example:  Policy with priority order of 18 needs to be 21.

     - If you need to move a policy up, it is recommended that you reduce the active policy count to <=20 to regain drag and drop reorder capabilities.

2) Associate policies with groups/objects in the order in which you want them prioritized.  They will always be placed at the bottom of the list, above Default Policy.

↧

Uptime metric for the VM

June 29, 2016, 3:16 am
$
0
0

Hi all,

 

I know that the Uptime metric stands for knowing for how much time the VM has been working without a reboot, but I want to understand what is the best value of this metric ?

If I put the uptime in a scoreboard, when should it be red, yellow and green ?

 

Thank you.

↧

Heartbeat metric of the VM

June 29, 2016, 4:39 am
$
0
0

Hi everyone,

 

Could any one explain to me what does Heartbeat metric means ? What is its maximum value ? the bad and the good value ?

 

Thank you.

↧
Search

Trend view for group of VMs showing individual trend lines

June 29, 2016, 8:12 am
$
0
0

I am aware of KB 2123145 in which it states it is not possible to run a trend view report on custom groups, however I'm trying to find another way that it might be possible to show a 30 day trend line of a given metric on virtual machines without specifying every VM manually. For example, say I have organized VMs into vSphere folders based on a certain grouping. I want to be able to run a report against that folder and have it show a certain metric and the trend line, but for every child object (VM) of that folder. I'm not looking to summarize an entire group with a trend line, since that would the job of a super metric. No matter what I try, I cannot come up with a way of getting this information from a group without picking and choosing VMs manually to show their trend line.

 

Has anyone come up with a way around this? I would think this is a fairly common thing to want, yet there doesn't appear to be a readily available and easy way to accomplish this task.

↧
↧

VROPS 6.2 : No Solution available on Administration page on new installation of VROPS 6.2

June 29, 2016, 12:12 am
$
0
0

I have installed vrops6.2 successfully on vCenter . Then did the settings (Creation of username and password, license key etc...) on admin web.

To configure adapter, visited ui web page of vrops https://<hostname>/ui

Navigated to "Solution" page (Administration>solution) to configure adapter.

I am not getting any existing solution (VWMWare vSphere) to configure the adapter. (Attached scree shot)

Can any one please assist here, how to configure adapter to collect data (alerts) from vCenter.

Thanks.

↧

Failed to send data: forward data queue is backing up, data is being lost!

June 29, 2016, 10:15 am
$
0
0

vRealize Operations Version 6.2.1.3774215 Build 3774215, Large Master node and 7 Data Collectors, 5 large remote collectors

Data nodes collection status changes from data receiving to blank.  Collector.log for data nodes shows:

[35782] 2016-06-29 14:47:35,743 WARN  [DataForwarder]  com.vmware.vcops.platform.common.DataForwarder.sendData - Failed to send forward data through channel : IRawDataForwarder.NotEnoughBufferSpace: com.gemstone.gemfire.cache.CacheWriterException: FORWARD_DATA_REGION region exceed the maximum number (20000) of entries.

[35783] 2016-06-29 14:47:36,516 FATAL [DataForwarder]  com.vmware.vcops.platform.common.DataForwarder.sendData - Failed to send data: forward data queue is backing up, data is being lost!

Anyone see this before?

↧

Hide Reorder/Autoswitch Dashboards from Actions Menu

June 30, 2016, 2:00 am
$
0
0

Hi all;

 

I have a group of user to which I give the minimum of permissions. They have access to their dashboards, and in Home page, there is the action button, with Reorder/Autoswitch Dashboards, when we click on it, we have the list of all available dashboards in vROPS. Is there any way to hide it ?

 

Thank you

↧

SRM Reporting

June 29, 2016, 4:24 am
$
0
0

Is there anyway to report on SRM settings - like recovery IP address, Datastore, folder etc?

↧
↧

Unable to Create Views

June 30, 2016, 4:45 pm
$
0
0

All,

 

I am new to VMware and vROPS.

 

From looking at the Virtual Distributed Switch (vDS) under Environment Overview>Custom Groups>vSphere World>Environment>List and filtering on vDS, I see there are six vDS.  I am trying to create a view of these six objects.

 

Here are my settings for the View

Name and Description:           All vDS

Presentation:                          List

Subjects:                                vSphere Distributed Switch

Data:                                      Properties>Configuration Name

When I select Filter and enter Properties, Configuration|Name, contains, and vDS, I see all vDS switches.

 

Under Preview Source, I select vSphere World (Custom Groups).

 

However, I always get “No Data to display”.

 

Any suggestions?

 

I've attached screenshot of View and Custom Groups page.

 

T.J.

↧

Max Observed Reads per second

July 3, 2016, 6:13 pm
$
0
0

Our main cluster is backed by a SAN that we estimate to be capable of approximately 30,000 IOps. vRealize Operations Manager reports a Max Observed Reads per second of 2.2 million IOps and Writes per second of 1.2 million IOps.

Consequently the "Capacity Remaining" dashboard shows that we're only using 1.5% of the capacity of our storage. Not true!

Does anyone know why these statistics are so out of whack?

Can anyone advise how to fix or reset these statistics? Or worse case how to manually set them to a more realistic figure?

Thanks, Liam.

↧
Search

vRealize operation manager polling

July 5, 2016, 3:39 am
$
0
0

Hi,

 

Is there any possibility to poll data from vROM?

 

VMWARE world is monitored by vROM but whole IT is monitored by other system.

 

What if I would like to poll some metrics from vROM? Is it possible somehow? Is SNMP some option?

↧

Multi tenant access shows underlying vcenter stats

July 5, 2016, 4:33 am
$
0
0

We are trying out vRealize on our public cloud offering and are looking to use it as a way to help our clients get the most out of the service.

I have followed some of the guides out there on setting it up  as multi tenanted including the youtube video titled 'How to create a multi-tenant structure in vRealize Operations Manager'

It looks great except for the fact the customers are able to see capacity for the VM's we have assigned to them but also the total capacity for the whole vCenter server through the environment view!

 

I'm sure I must have an additional permission somewhere  but still fairly new to vRealize if anyone else has come across this before and can point me in the right direction?

Thanks

↧
↧

Problem with Views 4.6 and KB3161608

July 4, 2016, 3:36 am
$
0
0

Hello


I have a problem with my client Views 4.6 on Windows 7.

It won't allow me more the connection from the installation of the KB3161608.


More particularly the KB3161639


my client does not want it uninstalls the concerned KB.


would you have an idea for circumvented this problem?

 

Thank you

↧

Permissions on report templates & views

July 5, 2016, 7:48 am
$
0
0

Is it possible to give a non admin user the permission to copy an exsisting view or report templates and/or give him the right to create a new view or report templates without the possibility to delete or modify the default / built-in views and report templates?

The user must be able to delete the views & report templates he created or copied himself.

 

I tried this but as soon as the user got the delete or modify right he was also able to delete or modify the built-in views and report templates.

↧

VOA Report Phase 1

July 1, 2016, 10:35 am
$
0
0

Hi

 

In the report Phase 1: configuration report section Virtual Machine Hardware Summary shows:

 

  • CPU Limie -1

 

anyone to know what is this meaning?

↧
Viewing all 5932 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>