Quantcast
Channel: VMware Communities : Discussion List - vRealize Operations Manager
Viewing all 5932 articles
Browse latest View live

vRealize Operations Manager 7.5 Data Retriever is Not Initialized yet

$
0
0

I am testing out this version of Operations Manager in my vSphere 6.7u3 environment.  Operations Manager was working fine before I shutdown the virtual appliance in order to save resources while I used HP's Smart Update Manager to update my three ESXi hosts firmware and drivers.  These three hosts are not clustered.  I've now booted up the Operations Manager appliance.  The appliance seems to boot up okay.  I can connect to it via https and SSH.  I can log into it via SSH.  However when I get to the login page for the website, I get the message "Data Retriever is not initialized yet.  Please wait...".  So I've waited for a day.  I've rebooted the appliance.  I've searched the docs, KBs, and communities for answers.  I've found similar requests for help in communities from 4 years ago.  Unfortunately no advice in those requests help in my situation.

 

Can someone help me get the data retriever to initialize successfully?


alarme critique

Number of VMs per vRA User (VRM Owner)

$
0
0

Hi all,

 

I'm looking for a way to get on overview of the total number of VMs of a particular vRA user.

 

The output should be like this:

OwnerConfigured vCPU
Reclaimable vCPUConfigured MEMReclaimable MEMTotal VMs
user-a10132124
user-b12816121
user-c1846408

 

One the vRA side there is one business group that contains multiple users. Whenever a user requests a VM the vCenter Custom Attribute VRM Owner is set with the user ID.

Vrops Telegraf Agent

$
0
0

Been searching all day for some documention on the telegraf agent.

 

 

I have it installed and running, but short of collecting some basic metrics, can i make it do anything more?

 

 

Like collect a different perf counter?

 

 

Monitor a service is running?

 

Ive add addional settings in the conf file, but it doesnt show up in the console.

 

Thanks for any input.

Idle VMs report question

$
0
0

I've run an Idle VMs report in vROM 6.6 and i'm not happy with the results.

It shows me very few VMs when I know we have more VMs (to the tune of dozens more) that are idle

 

We want to get rid of waste, VMs not being used.  The problem is that the idle VMs report is based on CPU utilization of 5% for 'n' period of time.

But we patch systems and backup systems regularly (daily, weekly, monthly) which throws the CPU utilization on VMs that are NEVER used up to 10% or more.

 

How can i TRULY find out what VMs are not being used daily? and that are simply a waste to even exist?

 

Thoughts?

update integrations

vROPS 7.5 Idle VMs

$
0
0

Hi, I'm trying to modify the idle VM report in vRops 7.5, at least to change the monitoring window to business hours would be helpful. Modifying the resource definitions of idle also if possible.

Any help is much appreciated, coming up blank on searches.
Thanks in advance

Creating a View/Report on Operations Manager for Horizon to show which users are connected to which security & connection server

$
0
0

I am really new to using Operations Manager for Horizon.  I can't seem to find the right combinations of metrics to get what I need.

 

If anyone can point me to resources that can help is greatly appreciated

 

What I want to do is to create a View/Report where it shows me my entire environment of which users(either their login ID AD Account) are connected to which View Security server and which View Connection server they are connected to.


Costum reports in vRops 6.2

$
0
0
Change the Cover Page of the generated reports, upload an image up to 5 MB.

What's VRealize Operations

$
0
0
Does anyone send me the introduction document for VRealize Operations?

Downgrading vRealize Operations License

$
0
0

Hi everyone.

 

how can i downgrade vRealize Operations license from 8.0 to 6.x. is there a limit to make a downgrade?

VROPS Report distribution via SFTP

$
0
0
I see how I can schedule a report to save to a standard URL share.  Is is possible to schedule a report to save via an SFTP location?

vRealize Operations - how to use powershell to delete a generated report - keep vROPS tidy

$
0
0

I have a need to script the generation of a vROPS report on a semi-regular basis into a .csv file for ingestion into another tool (Splunk).  Utilizing a script created by Ryan Kowalewski over at https://ryanjan.uk/2018/05/16/running-vrops-reports-using-powercli/  I am able to generate the report and download it as .csv for use elsewhere.

 

I'm trying to figure out a method of cleaning up afterword utilizing the vROPS API to include in the script to automate the deletion of the generated report after download.  Anyone know how this can be done?

 

Thank you.

vROPS 8.0 - Is there a way to create a report that contains a list of vmdk's that shows the delta of the last 24 or 48 hrs using the metric of partition utilization?

$
0
0

I am having the issue of a few volumes filling up and are not sure where it is coming from. We thin provision (i know that with thick provisioning it wouldn't be an issue) but it is what was setup before me. I am just looking for a way to easily do a show/shameback to the admins that are taking the space.

Upgrade vROPS 6.7.0 to 8.0

$
0
0

Hello,

 

We currently have vRealize Operation Manager 6.7.0.8183617 running in a 2 node cluster setup. We are wondering if it is possible to upgrade to 8.0 without loosing the already collected data. We know this was the case from version 6.0 to 6.7. Or should we setup 2 new servers? Thanks for the feedback.

 

I already ran vRealize Operations Manager Pre-Upgrade to 8.0.1 Assessment Tool which looks "sort of" promising.

 

Validating product version

Make sure to run vRealize Operations Manager - 6.6.1, 6.7, 7.0 and 7.5 Virtual Appliance upgrade, as product version is 6.7.0 Ensure product and upgrade versions meet the requirements.

 

Validating there are no Active Self Monitoring Alerts existing on the cluster.
2 ACTIVE alerts, ALERT_DEFINITION: 1. vRealize Operations Cluster processes may not have enough memory 2. Error synchronizing user privilege information with VMware Virtual Center
Best regardsDavy

Abnormal CPU Usage Alert

$
0
0

Hi Guys,

 

I am trying to set up an alert to trigger based on spikes. To clarify if the average CPU usage is 10%, and then we see a spike to 20%-25% even for a 30s, i would like this to trigger an alert.

 

Had a look at Dynamic Threshold metrics, but it doesn't seem to work correctly or I am not able to get it to work.

 

Found a kb on how to config but it seems to be tied to a X CPU value (symptom definition, ie. CPU critical or warning).

https://docs.vmware.com/en/vRealize-Operations-Manager/8.0/com.vmware.vcom.core.doc/GUID-22341ACF-8D4A-4B82-8067-0745632C8555.html

 

So is there a way to create an alert that will trigger if the CPU usage change X value over X time, or something similar.

 

vROPS version 8.

Vmware site recovery manager server service is unable to start

$
0
0

Observing the below error when we start the service. Can someone provide a solution to this

From vmware-dr.log file:

 

2020-01-29T22:46:48.167-08:00 error vmware-dr[03008] [SRM@6876 sub=WindowsService] [serviceWin32:303] VMware vCenter Site Recovery Manager application error.

-->

--> Application error: class Dr::Crypto::NotFoundException Crypto Exception: No certificate for local SU

--> [context]zKq7AVMEAAgAAFaTwQAYdm13YXJlLWRyAAAKox52bWFjb3JlLmRsbAAAkA0GAA41BgAqPwIBJ9ACZHItY3J5cHRvLmRsbAABbNICAbvVAgIn/y9kci10b3BvbG9neS5kbGwAA+Y9JnZtd2FyZS1kci5leGUAA2UHJgStqwpkci1hdXRob3JpemF0aW9uLmRsbAADpKUlA0iEJQP90SMDLQImA47GGwXepQB3aW5kb3dzU2VydmljZS5kbGwABscIAmRyLXZtYWNvcmUuZGxsAAZXiAIGBYcCBfCuAAfaWgBzZWNob3N0LmRsbAAI0hMAS0VSTkVMMzIuRExMAAnkVAFudGRsbC5kbGwA[/context]

--> [backtrace begin] product: VMware vCenter Site Recovery Manager, version: 8.1.2, build: build-12686166, tag: vmware-dr, cpu: x86_64, os: windows, buildType: release

--> backtrace[00] vmacore.dll[0x001EA30A]

--> backtrace[01] vmacore.dll[0x00060D90]

--> backtrace[02] vmacore.dll[0x0006350E]

--> backtrace[03] vmacore.dll[0x00023F2A]

--> backtrace[04] dr-crypto.dll[0x0002D027]

--> backtrace[05] dr-crypto.dll[0x0002D26C]

--> backtrace[06] dr-crypto.dll[0x0002D5BB]

--> backtrace[07] dr-topology.dll[0x002FFF27]

--> backtrace[08] vmware-dr.exe[0x00263DE6]

--> backtrace[09] vmware-dr.exe[0x00260765]

--> backtrace[10] dr-authorization.dll[0x000AABAD]

--> backtrace[11] vmware-dr.exe[0x0025A5A4]

--> backtrace[12] vmware-dr.exe[0x00258448]

--> backtrace[13] vmware-dr.exe[0x0023D1FD]

--> backtrace[14] vmware-dr.exe[0x0026022D]

--> backtrace[15] vmware-dr.exe[0x001BC68E]

--> backtrace[16] windowsService.dll[0x0000A5DE]

--> backtrace[17] dr-vmacore.dll[0x000208C7]

--> backtrace[18] dr-vmacore.dll[0x00028857]

--> backtrace[19] dr-vmacore.dll[0x00028705]

--> backtrace[20] windowsService.dll[0x0000AEF0]

--> backtrace[21] sechost.dll[0x00005ADA]

--> backtrace[22] KERNEL32.DLL[0x000013D2]

--> backtrace[23] ntdll.dll[0x000154E4]

--> [backtrace end]

Dual vCenter Registration

$
0
0

Im currently running vROPS 7.0. Ive started building a brand new 7.5 environment (i.e. not upgrading my existing 7.0 nodes). When adding the vCenter adapter to the new 7.5 environment, I receive the message shown below. If I answer 'yes', will my old 7.0 environment continue to collect data from vCenter? Or will only the 7.5 environment receive vCenter data?

 

Ideally, I want the old 7.0 and new 7.5 environments to run in tandem until Im satisfied with the 7.5 build out (and then Ill shutdown the 7.0).

 

Issue with account admin

$
0
0

Hello,

 

I'm encoutering a issue to login on my vrops /admin with account admin

 

I connect first,it's good but some minutes later i don't connect :

 

 

the account is not locked because i can login in ssh but not GUI.

 

I found a kb vmware to resolve my issue but not success :

 

VMware Knowledge Base

 

I rebooted master node and datas node but not solved

 

Someone had the similar issue?

 

Thank you for feedback

Question on licence support for vROps Manager

$
0
0

I am using standard licence for vCenter

 

 

Enterprise licence for vSAN [which supports vRealize Operations with in vCenter]

 

 

To take advantage of my vSAN licence, do we need separate vROps licence since I am using standard vCenter licence?

 

 

Appreciate your response  

 

 

Thank You,
Volga

Viewing all 5932 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>